UEFA TV

Engine foot glue (the function and UEFA TVreplacement method of automobile engine foot glue) is one of the core components of the automobile, and the operating state of the engine is related to the performance, fuel consumption and service life of the car. To ensure the stable operation of the engine, the connecting part of the engine and the chassis - the engine foot glue is needed. Engine foot glue is a kind of rubber product, which is usually fixed between the engine bracket and the frame. Its function is to relieve the vibration and noise of the engine and ensure the smooth operation of the engine. Engine foot glue plays an important role in ensuring the performance, safety and ride comfort of the car, and also plays an important role in the service life of the car. Therefore, maintenance and replacement of engine foot glue is an indispensable part of car maintenance.So how to replace the engine foot glue? 1. Check the condition of the engine foot glue. Before replacing the engine foot glue, first check the condition of the engine foot glue. The degree of wear of the engine foot glue has a direct impact on the operation and performance of the engine. In use, the engine foot glue will be worn by vibration, vibration and other factors over time, which will make the engine foot glue not strong enough and even lead to cracking. Therefore, checking the condition of the engine foot glue is the first step to be told. Two. Remove the old engine foot glue. When you find that the engine foot glue needs to be replaced, the second step is to remove the old engine foot glue. When removing the foot glue, make sure that no other components on the engine bracket will be loose or damaged. Use a jack to support the engine, then unscrew the screws and remove the old engine foot glue from the protruding part on the engine bracket.For some bent-shaped foot glue, it can be removed with special shape pliers. 3. Replace the new engine foot glue. After the old foot glue has been removed, the third step is to replace the new engine foot glue. Before installing the new foot glue, it is necessary to determine the installation direction and evaluate its position. Most new engine foot glues have a label or mark to indicate the effective position of the card seat. In general, the seat will work more effectively when the seat is in the center, but sometimes the seat needs to be offset, depending on the position of the engine pipeline and the thickness selected. Four. Fix the new engine foot glue. When installing the engine foot glue, you need to use a new screw to fix it to the engine bracket. Then use a cross winch to push the engine back to the installation position. Next, check whether the new engine foot glue is in the correct position and there are no other abnormal tilts.If an abnormal phenomenon is found, you need to remove the engine foot glue again for reinstallation. The above is the general process of replacing the engine foot glue. When maintaining and replacing the engine foot glue, it should be noted that high-quality foot glue must be used, which can not only improve the stability of the engine, but also extend the service life. Maintaining the engine foot glue plays an important role in the performance, fuel consumption and service life of the car, which has a great impact on our driving safety and comfort.

Contact Us
Phone：020-83484671